APD HV_Pro 24S 200A 180MHz 32-Bit ESC



About this product
The APD HV-Pro Series ESCs Are The Highest Power Density ESC’s Ever Designed.
These ESC’s have over 4 x the Silicon Junction area compared to other similar-sized ESC’s. In a class of their own. The HV_Pro24 100V can deliver a sustained 200 Amps* with a burst current rating of 300Amps.
Running a 180 MHz 32-Bit processor these will deliver maximum smoothness, unmatched linearity, with ultra-fast throttle response for unsurpassed flight control. With peak power ratings up to 30kWs , these ESCs will have no trouble powering your craft.
The APD developed (proprietary) firmware ensures unmatched low-throttle and starting characteristics. Ultra-smooth starting and ramp-up characteristics ensure your drive-train is safe. Features include PWM-frequency dithering to avoid PWM-commutation synchronization, adaptive motor timing advance and proprietary developed Active Phase-Current De-magnetisation (APCD). APCD along with Synchronous rectification ensure maximum ESC efficiency is achieved.
Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.
Aerospace-grade ceramic capacitor bank for lowest possible ESR and maximum reliability, no more dried up electrolytic failures!
Multiple operation modes:
Normally used for watercraft and aircraft not requiring reverse.
Incremental + Linear power ramp control.
Instantaneous input = Output Step Response.
Soft-start for drivetrain protection.
Same as normal except for active torque control, which applies a motor phase current limit that ramps proportionally with higher motor duty-cycles.
Plug and play firmware
Up to 24S/100V
Up to 200Amps continuous* current with airflow
300A Burst current
True 12bit throttle resolution
Feed-Forward compensator
Up to 480Hz input update rate (Standard PWM)
Runs Oneshot125, Multishot and Proshot Up to 32Khz
Over 1,000,000 eRPM
Auto PWM-freq
Auto Timing Advance
Onboard 16Mbit Flash memory – Data-logging
Firmware updatable through the micro-USB port
Isolated Input and output (Can be configured for RPM)
Fully configurable through the APD ESC Config Tool (micro-USB Connection)
Optional external capacitor board for >1m input leads lengths: Cap Board
* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 180 seconds with 10 m/s airflow.
Weight 256g (0.22 kg)
Dimensions 77 × 52 × 27 mm
Documentation and Datasheets can be found at docs.powerdrives.net


There are no reviews yet.

Be the first to review “APD HV_Pro 24S 200A 180MHz 32-Bit ESC”

Your email address will not be published. Required fields are marked *