2Fiddy HD 5″ Ultra Light Freestyle RTF w/ Caddx Nebula Pro – 6S



About this product
Lumenier has built an HD BNF version of the Ummagawd 2Fiddy 5″ Ultra Light Freestyle Frame !
This frame was designed to be simple yet durable. With 4mm carbon fiber arms, smooth Ummagawd Aerolite 2004 1600KV 6S motors, Caddx Vista – Nebula Pro Camera Unit, and an iFlight Beast F7 45A AIO… this RTF is ready to fly! Simply bind your goggles and remote and tune into a buttery smooth flight.
This build now includes Lumenier’s 220mm indestructible kevlar LiPo straps!
VIDEO: Ummagawd 2Fiddy 5″ Ultra Light Freestyle RTF – 6SUmmagawd 2Fiddy Sub250g Freestyle Ripper
This HD RTF is Pre-Built and tested at our premier Lumenier facility here in Florida.
iFlight Beast F7 45A AIO w/ updated XT30U Connector (Works with XT30 also)
Built with the Caddx Vista – Nebula Pro Unit
Toilet Tank OR Standard Battery Position
Ultra-lightweight Sub250 Design
4mm Thick Quick Swap Arms
Universal FC Mounting
Versatile and durable
Ultra Lightweight
There’s no doubt that a 250g 5” Freestyle Drone is a new category, with very different design goals and limitations. Extracting as much power, response, durability, and of course “fun”, this RTF gets as CLOSE to an AUW of 250g as possible
Why? Because let’s face it, having some weight to toss around allows for a bit more “expression” with your freestyle and there’s something just absolutely satisfying about it.
So, the frame was tested and simulated a variety of carbon thicknesses, component layouts, and fasteners. Simply scaling down a 5″ frame may introduce frame resonance, and that will certainly affect performance. Although some resonance and vibrations can be smoothed out by firmware features, great frames shouldn’t require special filtering to run smoothly.
One of the most unique features of this frame is its versatility for mounting your FC/ESC. Use of AIO flight controllers saves weight but doesn’t limit people to one layout. The 2Fiddy frame has holes for 30.5×30.5, 20×20, and whoop style layouts. Although running an AIO board is recommended, you can even run a dual FC/ESC stack by simply flipping the arms under the bottom plate and using the included 20mm standoffs.
While the frame was designed specifically around the Caddx Vista FPV system, analog FPV gear will work just fine for other types of builds. The rear section has 20×20 mounting holes that line up with the vista unit, and the top plate has a little notch to keep your antenna centered along with the rear standoff. This design allows you to simply use a zip tie to mount your antenna without the need for a 3d printed part. The front camera cage is spaced for a 20mm DJI camera, however, smaller 19mm micro analog cameras work just fine. There are double slotted mounting holes for the DJI camera as well as a dedicated center hole for cameras such as the Nebula Pro HD or Caddx Polar Micro, which provides 0-35 degrees of tilt. The cam cage features an innovative plate-lock design that ensures maximum camera protection while ensuring that the cage won’t pop out in a crash.
Arms are locked in place by two bolts and use press nuts for both ease of use and to keep the attachment locations as low profile as possible. No arm mounting hardware is shared with any electronics and the arms meet at the middle for a unibody-like stiffness. These arms were not only tuned for reduced resonance, and ease of replacement, but are also made to be as durable as possible without causing a break elsewhere on the frame.
Motors: Ummagawd Aerolite 2004 1600KV 6S
VTX/Camera: Caddx Vista Nebula Pro
FC/ESC: iFlight Beast F7 45A AIO
Props: HQ Prop T5X3 (GREY)
Weight: 180g (without battery)
RX: DJI (PNP) OR Crossfire
Frame: Ummagawd 2Fiddy
Carbon Thickness: 4mm
Brand: Ummagawd
Arm Size: 5″
Recommended (Not Included)
Goggles: DJI FPV Goggles V2 ( Note: The DJI FPV Goggles are mandatory for the use of the included VTX)
Battery: BETAFPV 550mAh 6S 75C Battery (2pcs) ( Note: This battery brings overall weight above 250g)
Radio: TBS Mambo Starter Set (Radio + 3 Tracer RX)
Battery Adapter: XT60 Male to XT30 Female Adapter
1x 2Fiddy HD 5″ Ultra Light Freestyle RTF w/ Caddx Nebula Pro – 6S (PNP or TBS Crossfire options)
2x Lumenier Indestructible Kevlar Lipo Strap – 16x220mm


There are no reviews yet.

Be the first to review “2Fiddy HD 5″ Ultra Light Freestyle RTF w/ Caddx Nebula Pro – 6S”

Your email address will not be published. Required fields are marked *